www.youtube.com/watch?v=qDLNOzrWfi8

It’s great that they have find a solution about this major problem. Dealerships are repairing 50,000 vehicles a day!

Toyota Announces Voluntary Recall on 8,000 2010 Model Year Tacoma 4WD Trucks to Inspect the Front Drive Shaft
TORRANCE, Calif., February 12, 2010 – Toyota Motor Sales (TMS), U.S.A., Inc, today announced it will conduct a voluntary safety recall to inspect the front drive shaft on a small production run of certain 2010 model year Tacoma 4WD trucks. The front shaft in approximately 8,000 vehicles may include a component that contains cracks that developed during the manufacturing process. As those vehicles are used, the cracks may eventually lead to the separation of the drive shaft at the joint portion.

This condition only involves two specific front drive shaft production lot numbers installed in certain 2010 model year Tacoma 4WD vehicles. No other Toyota or Lexus vehicles are involved.

Dealers will be instructed to perform an inspection to identify the specific lot numbers located on the front drive shaft. Based upon the inspection results, in a limited number of cases, the front drive shaft may need to be replaced.

The inspection is estimated to take ten minutes. The inspection and/or replacement will be performed at no cost to the vehicle owner.

Toyota will notify owners by first class mail starting in mid-March, 2010.

Detailed information and answers to questions about issues related to this recall are available to customers at www.toyota.com/recall and at the Toyota Customer Experience Center at 1-800-331-4331.

MEDIA CONTACTS:
Toyota Motor Sales, Corporate Communications
(310) 468-5297
(310) 468-7359

Inspection of Power Steering Hose Position on Certain 2010 Camry Also Announced

Recalls Underscore Toyota’s Commitment to Address All Vehicle Quality and Safety Issues Promptly and Effectively

TORRANCE, Calif., February 8, 2010 – Toyota Motor Sales (TMS), U.S.A., Inc, today announced it will conduct a voluntary safety recall on approximately 133,000 2010 Model Year Prius vehicles and 14,500 Lexus Division 2010 HS 250h vehicles to update software in the vehicle’s anti-lock brake system (ABS). No other Toyota, Lexus, or Scion vehicles are involved in this recall.

The ABS, in normal operation, engages and disengages rapidly (many times per second) as the control system senses and reacts to tire slippage. Some 2010 model year Prius and 2010 HS 250h owners have reported experiencing inconsistent brake feel during slow and steady application of brakes on rough or slick road surfaces when the ABS is activated in an effort to maintain tire traction.

Toyota has responded to owner concerns with a running production change for 2010 Prius that was introduced last month, improving the ABS system’s response time, as well as the system’s overall sensitivity to tire slippage. The production change for the HS 250h is planned for later this month.

“We’re committed to doing everything we can – as fast as we can – to restore consumer trust in Toyota, and these recalls are part of this effort,” said Jim Lentz, President and Chief Operating Officer, Toyota Motor Sales. “We regret the inconvenience this recall will cause to Prius and HS 250h owners, and will do our best with the support of our dealers to make sure that it is conducted in the most trouble-free manner possible.”

Mr. Lentz continued: “As part of the quality improvement program announced by Toyota President Akio Toyoda last week, our company is undertaking a top to bottom review to ensure that our vehicles meet our own high standards of safety and reliability, now and for the future. We are taking steps to implement more stringent quality control across the company, to investigate customer complaints more aggressively and to respond more quickly to any safety issues we identify.”

The recall will allow Toyota dealers to perform the software update on 2010 Prius vehicles sold prior to this running production change. Only Prius vehicles produced since May 2009 and all HS 250h vehicles are subject to this recall. First- and second-generation Prius vehicles use a different ABS system and are not involved in this campaign.

The ABS system on the Lexus HS 250h is similar in design to the Prius. The software adjustment planned for HS 250h production and dealer modification is being finalized and will be announced very soon.

Toyota will begin mailing letters to Prius owners included in this recall next week and HS 250h owners within the next few weeks, to let them know when to bring their vehicles into a dealership. Owners will only receive a letter if their vehicle is involved in the recall.

Separately, Toyota will conduct a voluntary safety recall on approximately 7,300 early production – 2010 model year Camry vehicles equipped with the 4 cylinder engine to inspect for a power steering hose that may be in contact with a front brake tube. This contact could lead to a hole in the brake tube and cause a brake fluid leak, increased brake pedal stroke and greater vehicle stopping distance.

Owners of the involved 2010 Camry vehicles will be notified by mail starting in the middle of February.

Detailed information about these recalls is available to customers at www.toyota.com/recall and at the Toyota Customer Experience Center at 1-800-331-4331.

MEDIA CONTACTS:
Toyota Motor Sales, Corporate Communications
(310) 468-5297
(310) 468-7359

Source: Toyota Pressroom